Grossezza XT

Bondago

$27.97

Bondago¬†is one of the best primers on the market.¬† This product will adhere to just about anything and can also be your base paint as well.¬† Eliminate a step and prime and paint all in one.¬† ¬†

Also, the Bondago¬†Clear allows you to prime your natural woods so that you can do a wet distress and expose the original color/wood.¬†¬†

Extremely tuff, acrylic water-borne primer/base coat
Specifically designed for high-end finishing applications
Excellent adhesion
flows and levels extremely well
Dries to a very hard, smooth, flat film
Non-porous hard surface, which promotes slip of glazing mediums
Tints easily

View full product details

Metallic Powders

$18.97

Metallic Mica Powders are fabulous to add to other mediums, like a glaze, Gel Medium, Crystal Clear Crackle and just about any clear medium.

View full product details

Rotto

$81.97

High viscosity water-based pull off chipping type plaster

Typically applied with a trowel

May be stippled or touched with the flat surface of the trowel¬†as the plaster starts to dry (10 to 20 minutes of drying)¬†

When touched, the plaster will adhere to the trowel, creating a chipped plaster/concrete look and feel.
As the plaster starts to set up and dry, tapping it with a paper towel and trowel will provide various textures.
These textures may be further modified by allowing them to dry and then knocking the texture down with the edge of the trowel.
Rotto is also easily scraped off with a putty knife while it is partially dry creating an¬†additional¬†chipped plaster appearance.
Once the plaster is fully dry (next day recommended) the plaster may be color washed with¬† Faux Colorants and glaze.
Rotto should not be vigorously stirred or mixed.
If a small amount of water separation is observed on the top of the product upon opening the container, a gentle mixing action to fold the product together is all that is needed prior to application.
Too much mixing or shaking may temporarily lower viscosity and adversely modify application properties.
Rotto is available in tint base only
Approximate coverage is 75-100 sq ft/gal, depending on application method

View full product details

Roccia PL

$81.97

A recommended procedure with many Perfetto plasters is to apply the plaster, then stipple the plaster with the flat surface of the trowel creating highs and lows or tips in the plaster. These textures may be further modified by allowing them to dry further and then knocking the texture (highs/lows/tips) down with the edge of the trowel. Once the plaster is fully dry it may be color washed with Perfetto colorants and glaze.

Roccia PL is available in tint base only, however it may be tinted with Colorants, or colorwashed.

Approximate coverage is 75-100 sq ft/gal, depending on application method

View full product details

Grossezza XT

Related Items

Bondago

Metallic Powders

Rotto

Rotto - Chipping Plaster

Roccia PL