Black Ice Holographic Foil

Black Ice is a glossy black crackled with fine silver holographic veins, like cracked ice at night. It's made for hard surfaces.

• Recommended base coat: Black
• Fabric: Hard surfaces only. This foil won't hold on fabric.
• Release: Standard release. Give it some extra scrubbing before you peel so the foil fully lets go of the carrier sheet.
• Toner-reactive: also works for toner foiling with laser-printed designs.

How to use it

Apply one thin, even coat of ArtsSyVille Foil Adhesive and allow it to dry to a firm tack before applying foil. Drying times vary by surface. Paper crafts and wood cutouts may be ready in 15–30 minutes, while furniture and painted surfaces generally need 2–4 hours or longer. For hats and tumblers, overnight drying is recommended.

Always check the tack before foiling. The adhesive should feel sticky, not wet. When in doubt, allow additional drying time for best results.

Then lay the foil pattern side up, rub it down, and peel. For complete application instructions, visit our ArtsSyVille Foil Adhesive product page. New to foiling? Jenn's free tutorials walk you through your first transfer.

Sizes

Cut to order: by the foot (12 × 12 in.); 12-inch rolls of 3, 15 and 100 ft; 24-inch wide rolls of 25, 50 and 100 ft. Ordering by the foot? A quantity of 2 gets you one 2-foot piece. By-the-foot foils aren't individually labeled.